1. Press the electric control switch on the controller panel to enter the operation preparation stage.
2. Correctly start and release the base brake.
3. Do not put heavy objects on the power cord or let the cart press the cord.
4. Prevent accidental injury
(1) To prevent tipping: After opening the base brake, the electric operating table is not locked and fixed. At this time, operating the operating table or transferring the patient may cause the operating table to shift or tip, which will cause the patient to fall from the bed. Therefore, the operating table must be locked after the adjustment operation is completed.
(2) Prevent pinching or crushing: Do not put your feet under the base when releasing the base brake.
(3) Prevent burns: prevent the patient's skin from contacting the metal parts of the operating table to avoid burns when using the electric knife.
(4) Prevent tripping: put the wire in a proper position to avoid tripping while walking.
(5) Prevent electric shock: Do not operate or repair the operating table when the electrical access cover or control components are removed.
5. Master the correct use of electric operating tables and the usage and installation methods of different accessories.
6. Do not allow the patient to sit on the headboard, body or leg of the operating table. Excessive weight may cause the accessories to bend and be damaged. The head plate and the basin are 40kg. When the two leg plates are separated by more than 45 degrees, they can only bear 20kg. The weight of the operating bed should not exceed 150kg.
7. Do not operate the hydraulic motor continuously for more than 5 minutes to avoid malfunction.
8. The hand control panel should be hung on the rail on the side of the operating table. The line should avoid pinching and crushing on the surface to prevent the line from being broken.
9. Do not place objects, accessories or heavy objects on the outer cover of the base of the operating bed.
10. Regularly check the functions of the electric operating table. Professionals will do the maintenance work to ensure the operation needs. The electric operating table should be charged on time to facilitate intraoperative use.
11. When purchasing accessories, try to unify the manufacturers to avoid management confusion. At the same time, accessories can also be used universally. Avoid waste of resources.
12. Do a good job of accessories management: when not in use, it should be placed on the special shelf in an orderly manner. Regular inspections. To prevent loss and damage.
13. Cleaning and disinfection of electric operating table and accessories
(1) Use the weak vitreous Qinggu Jingu Jingu Surgical Table and accessories containing surface-active Jing and phosphate gel salt.
(2) The disinfection of the surgical bed should be diluted with a surface disinfectant containing ethyl sulfonate to disinfect the surgical bed? Can not use scratches, scratching compounds and mixtures containing ethyl drunk? To avoid corrosion of the metal surface.
(3) Do not use detergent and water to spray or rinse the base? Prevent the internal electrical control system from short-circuiting, rusting or malfunctioning parts.
Post time: May-04-2021