1. Before using the multifunctional electric nursing hospital bed, first check whether the power cord is firmly connected. Whether the controller cable is reliable.
2. People cannot stand on the bed and jump. When the backboard is raised, people sitting on the backboard and standing on the bed panel are not allowed to push.
3. The wire and power cord of the linear actuator of the controller shall not be placed between the lifting link and the upper and lower bed frames to prevent the wires from being cut and causing personal equipment accidents.
4. After the universal wheel is braked, it is not allowed to push or move, it can only move after releasing the brake.
5. After the backplane is raised, the patient lies on the panel and is not allowed to push.
6. Uneven road surface cannot be implemented to prevent damage to the universal wheel of the multifunctional electric medical bed.
7. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is not allowed to press more than two buttons at the same time to operate the multifunctional electric patient hospital bed, so as to avoid malfunctions and endanger the safety of patients.
8. When the multifunctional electric medical bed needs to be moved, the lifting guardrail should be lifted to prevent the patient from falling and being injured during the movement. When the electric hospital bed is moving, two people must operate it at the same time to avoid losing control of the direction during the implementation process, causing damage to the structural parts and endangering the health of the patients.
9. It is not allowed to push it horizontally to avoid damaging to the lifting guardrail.
10. When the multifunctional electric nursing bed needs to be moved, the power plug must be unplugged, and the power controller wire must be wound before it can be pushed.
Post time: Apr-06-2021